The B6713T is a 1-1/4 HP-class DC belt-drive opener with battery backup, 2,000-lumen Corner to Corner LED lighting, myQ/Bluetooth connectivity, a yellow Learn button and Security+ 2.0.
Confirm this is the opener you have
Use several source-backed clues together. The motor-unit label remains the strongest identity clue.
Use the full motor-unit label for model identity; do not identify from opener case shape alone.
Use this as a cross-check, not as a substitute for the model label.
This changes power-outage diagnosis and helps separate nearby models.
Keep network/connectivity diagnosis separate from physical door movement.
Use the active receiver or Learn-button generation before ordering a remote.
Model specifications that matter for troubleshooting
No exact-model remote row is published locally yet
That does not mean the model is unsupported. Use the active receiver / Learn-button evidence and the manufacturer’s current compatibility row rather than inferring a remote from case shape, frequency or a nearby model.
Wall-control compatibility for this model
Wired controls follow the opener logic/control interface. Wireless wall consoles follow the active radio receiver.
Motion-Detecting Wall Control Panel
Wired logic path. Chamberlain's current B6713T product page lists a motion-detecting wall control in the included package. The page does not establish a replacement part number in the text used here, so verify the current parts diagram before ordering.
myQ Control Panel
A same-brand or myQ label does not make 889LM universal. Verify the opener generation and manufacture date before ordering.
Verify: Chamberlain Group documents the 888LM/889LM control-panel family for Chamberlain/LiftMaster Security+ openers manufactured after 1998 with purple or red/orange Learn buttons. Do not apply this to Security+ 2.0 yellow-button openers.
Genie Universal Wireless Wall Console
Because this console is wireless, an external receiver can change compatibility even though the wired wall-control path is unchanged.
Verify: Genie's chart lists Chamberlain yellow Security+ 2.0, purple Security+, red/orange Security+, green Billion Code and selected DIP-switch branches. Confirm the active receiver/Learn-button generation before programming.
B6713T is the high-light-output, battery-equipped belt-drive branch
Chamberlain specifies 2,000 lumens of integrated Corner to Corner LED lighting and battery backup. Those facts make the model easy to distinguish from nearby 1,000-lumen models such as the B4613T when the model sticker is hard to read.
The lighting package is not itself a diagnostic code. If the opener's LED light works but the door does not close, use the safety-sensor and travel symptoms rather than treating the light output as evidence that the drive system is healthy.
Yellow Learn button keeps programming on the Security+ 2.0 path
Chamberlain lists the B6713T with a yellow Learn button and Security+ 2.0. This lets you reject programming instructions written specifically for green, red/orange or purple legacy opener generations.
The model page also lists a three-button visor remote as included. For replacement purchasing, however, use the current compatibility table because accessory lineups can change independently of the opener itself.
A stronger motor rating does not mean you should raise force
Chamberlain describes the B6713T as a 1-1/4 HP lift-force class model, but a door that suddenly requires excessive force can still be mechanically unsafe. The opener's capacity is not a reason to compensate for a failing spring, damaged roller or binding track by increasing settings.
If the door feels unusually heavy or will not stay balanced when safely disconnected in the fully closed position, stop opener adjustment and address the door system.
Common troubleshooting paths for this model
Route from the observed symptom or code. Do not use model identity by itself as proof of the failed part.
Door reverses before reaching the floor
Check the sensor system and obstruction path first, then use travel/force diagnosis only after the door itself moves freely.
Open the exact troubleshooting path →Amber sender is on but green receiver is off
This is a specific Chamberlain sensor-state branch. Inspect the receiver side, alignment and low-voltage wiring.
Open the exact troubleshooting path →Travel limits will not save
Use the model's exact travel-learning procedure and stop if learning repeatedly fails rather than repeatedly cycling the door.
Open the exact troubleshooting path →Wi-Fi LED stays solid blue
Solid blue is a myQ setup-stage clue, not the final connected state. Check signal and retry setup before changing door settings.
Open the exact troubleshooting path →Need a replacement remote/keypad
The B6713T is a yellow-button Security+ 2.0 opener. Use Chamberlain's current yellow-button compatibility guidance for exact accessories.
Open the exact troubleshooting path →Nearby Chamberlain models to rule out
Only verified fields are compared. Missing evidence is never converted into a “No.”
B4613T
Current verified fields do not expose a clean difference here; use the full comparison matrix before assuming equivalence.
Shared evidence: Drive / mount: Belt drive, DC · Battery: YesOpen B4613T →B2211T
- Drive / mount: Belt drive, DC vs Belt drive
- Smart: myQ + integrated Bluetooth vs myQ / Wi-Fi
B6755T
- Drive / mount: Belt drive, DC vs Ultra-quiet belt-drive family
- Smart: myQ + integrated Bluetooth vs myQ / Wi-Fi
Capture these facts before you order or escalate
A clean handoff preserves the evidence that separates opener identity, receiver compatibility and the actual failure symptom.
Motor-unit label
Photograph the full label showing B6713T and any SKU suffix. Use that label for manuals and model-specific parts.
Active receiver / Learn control
Record the Learn-button color or external receiver model separately. A replaced receiver can change remote compatibility without changing the opener model.
Exact symptom or signal
Write down the code, blink count, sensor LED pair, direction of travel and where the door stops or reverses before changing settings.
Door-system boundary
If the door is crooked, off-track, unusually heavy, or has damaged spring/cable hardware, stop opener troubleshooting and hand off the mechanical door problem.
Model-specific guardrails
- The B6713T uses the same broad Chamberlain Group sensor/travel diagnostic family as other current yellow-button residential openers, but model-specific owner instructions still take priority.
- Chamberlain lists battery backup and a replacement battery in the product support section.
- The 041-0136 safety-sensor kit is listed as compatible with this model.
- Mechanical door problems should not be corrected by increasing opener force.
Never use opener force or a safety-system bypass to compensate for a heavy, damaged, off-track or unbalanced garage door.
Chamberlain B6713T common questions
What Learn button does the Chamberlain B6713T use?
Chamberlain lists a yellow Learn button and Security+ 2.0.
Does the B6713T have battery backup?
Yes. Battery backup is a listed model feature.
How bright is the B6713T lighting?
Chamberlain specifies 2,000 lumens of integrated Corner to Corner LED lighting.
What is the B6713T motor class?
Chamberlain lists 1-1/4 HP lifting-force class with a DC belt-drive system.
Verified model sources used
These manufacturer, manual and official parts/support sources are the factual baseline for the model identification and specifications above. Current manufacturer documentation supersedes older copies found elsewhere.